产品详情
品牌：JK
产品特性：双回转马达
产品别名：JK593G潜孔钻车
适用范围：光伏发电站桩基钻孔
凿孔直径：90-350mm
凿孔深度：50m
凿孔速度：1200mm\/min
冲击能量：900
冲击频率：45Hz
规格：JK593G潜孔钻机
可售卖地：全国
型号：JK593G潜孔钻机
JK593G爆破光伏钻孔履带式多功能钻机
JK593G爆破光伏钻孔履带式多功能钻机，结构优化，进尺，设计更人性化。采用柴油发动机一液压油泵组为动力装置，由液压马达实现钻机回转、推进、提升、行走及液压油缸摆角定位等辅助动作。
JK593G履带式液压潜孔钻机主要用于光伏、水电工程，露天采矿，道路修建，工程的钻凿爆破孔作业。
JK593G is a dual - purpose driling rig for blasting holes and photovoltaic holes . The structure is fuly optimized , the footage cost is lower , and the design is more user - friendly . The diesel engine - hydraulic oil pump set is used as the power device , and the auxiliary bbbbbbs of the driling rig such as rotation , feeding , lifting , walking and hydraulic cylinder swing angle bbbbbbbbing are realized by the hydraulic motor .
JK593G crawler mounted hydraulic down - the - hole driling rig is mainly used for driling and blasting holes in photovoltaic , hydropower projects , open - pit mining ,Г oad construction , and national defense projects .
01、回转机 Rotation unit
型回转箱体，双马达回转，回转扭矩更大，且可实现回转速度双速调节，设有转速切换，两档转速快速切换，以便钻机适用不同工况。带减震器接头，运行更平稳，故障率，降低了日常维护松散层不易卡钻，成孔。
进口回转密封件，密封性好、寿命长。
The reinforced rotation unit has dual motors , which brings greater rotation torque and can realize two - speed adjustment of rotation speed . Equipped with a speed switching valve , the two - speed speed can be quickly switched , so that the drilling rig can be used in different working conditions . With a shock absorber joint , the operation is more stable , the failure rate is lower , and the daily maintenance cost is reduced , besides , the loose layer is not easy to get stuck so as to realize higher hole bbbbation rate .
Imported rotary seals have good sealing perbbbbance and long service life .
02、动力装置 Power train
进口液压油泵、液压，耐压高，排量大，质量，寿命长。
潍柴74KW增压发动机，柴油机配置满足阶段排放标准。动力强劲，易维护保养。
两级空气滤清装置，确保发动机吸入洁净空气，。
油水一体散热器，在高温环境下，发动机和液压系统正常工作。
Imported hydraulic oil pump has high pressure resistance , large displacement , more reliable quality and long life .
Weichai 74KW engine configuration meets Phase Ill emission standards , it is powerful and easy to maintain .
The two - stage air filter device ensures that the engine sucks in clean air , which is safe and reliable .
The oil - water integrated radiator ensures the normal operation of the engine and hydraulic system in a high temperature environment .
03、免维护推进机构 Maintenance - free feed mechanism
液压机械双重锁定，液压马达的大扭矩稳定输出，自动机械锁定，防止下滑，二者结合，使用寿命长。
技术更，不需要日常油维护。
The hydraulic and mechanical double lock not only ensures the stable output of the large torque of the hydraulic motor , but also greatly imp Г oves the service life than the worm and gear . The mechanical lock also prevents hydraulic leakage and prevents sliding . The combination of the two , each takes its own strengths .
The technology is more advanced which does not require daily refueling and maintenance .
04、操纵台 Control panel
操纵集中布置，便于钻机的各项操作控制。液压操作系统，，操作简单，维护低。视野更宽，操纵更安全，适合工地的不同使用情况，设计更加安全化、人性化。
快速推进及提升操作，减少辅助时间，提。推进力大小可根据钻进需要随时调节。
The control valves are centraly arranged to facilitate the operation and control of the drilling rig . Hydraulic operating system , reliable perbbbbance , simple operation and low maintenance cost . Wider field of vision , safer manipulation , suitable for different use situations on the construction ste , and more secure and user - friendly design .
Quickly feeding and lifting operations , reduce auxiliary time and improve efficiency . The feeding force can be adjusted at any time according to the drilling needs .
05、底盘系统Maintenance - free undercarriage
加长底盘，重心降低，稳定性好。
大扭矩行走马达，爬坡能力强，行走速度快，同时配有双速行走系统，节省移位时间。
装配行走平衡系统，履帯架前后浮动各10度，适于崎岖现场施工。
免维护四轮一带，无需注油。
加装履带护板，防止履带脱轨。
加装双钻杆库和大操作站立平台。
Lengthened chassis , lower center of gravity and better stability .
The high - torque walking motor has strong climbing ability and fast walking speed , and is equipped with a two - speed walking system to save shifting time .
Equipped with a walking balance system , the crawler frame floats 10° forward and backward , which is suitable for rough site construction .
Maintenance - free four - wheel belt , no need to fil
Oil . Instal track guards to prevent track derailment . A double dril rod carousel and a large operating standing platbbbb are installed .
06、滑架系统 Feeding system
型滑架，双外翻式加工导轨，导轨厚、精度高，推进、提升及滑架补偿更稳定。
一体式钻臂支座，强度高，钻臂稳定性好，维修便捷。多角度、加长型功能钻臂，钻孔范围更广，比同类钻机钻孔工作扇形面积多20%。
滑架及钻臂稳定性好，能压得住，适合光伏大孔作业
Reinforced feed , with double valgus processing wear - resistant guide rail , which is thick and with high precision , can bring more stable perbbbbance of feeding , lifting and extension .
The integrated boom support has high strength , good boom stability and convenient maintenance .
Multi - angle , lengthened functional dril arm have wider drilling range ,20% more fan - shaped area than similar drilling rigs .
07、电控系统 Electronic control system
电控系统采用进口元，品质可靠，故障率低。
发动机的工作运行参数、提示、报警功能集中在仪表上，便于操作者观察，各项数据一目了然。
可选配角度仪，钻机的开孔角度实时显示，方便操作者准确布孔，掌控全局。
The electronic control system adopts imported compo -nents , with reliable quality and low failure rate .
The operating bbbbbeters , bbbbbbs and alarm functions of the engine are concentrated on the instrument , which is conve - nient for the operator to observe and makes the data bbbbb at a glance .
Inclinometer is optional . The driling angle of the driling rig is displayed in real time , which is convenient for the operator to arrange holes accurabbby and control the overall situation .
JK593G爆破光伏多功能钻机技术参数/Technical Specications | |
钻孔直径Hole diameter | φ90 -φ300mm |
钻杆长度Rod-changing length | 3m |
适应岩石硬度Applicable rock hardness | f=6-20 |
工作风压Working air presure | 1.2-2.5MPa |
滑架行程Feeding stroke | 4138mm |
水平凿岩高度 horizontal dilling height | 3370mm |
回转速度Rotation rate | 0-110rpm |
回转扭矩Rotation torque | 4200Nm |
行走速度Walking speed | 2.2Km/h、 3.6Km/h |
爬坡能力Grade ability30° | 30° |
动力Power潍柴Yuchai | 74KW |
全液压干式Hydraulic dry type dust collector | 除尘器(选配) Dust collector (optional) |
湿式除尘Wet type dust collector | |
外形尺寸Dimension (LWH) | 7000x 2400x 2700mm |
整机重量Weight | 7500kg |
